HP StorageWorks Scalable File Share for SFS20 Enclosure Hardware Installation Guide Version 2.2

HP SFS20 UsageDescriptionItem
Smart Array 6404 adapter and optional second
Smart Array 6404 adapter.
A PCI-X riser is used to convert PCI slot 5 and PCI
slot 4 from PCI Express to PCI-X.
PCI slot 4 is reserved for a second Smart Array 6404
adapter; the second adapter is present if more than
four SFS20 arrays are connected to the server.
Expansion slot 43
PCI slot 5 is used for a Smart Array 6404 adapter.
This adapter has four ports, allowing up to four
SFS20 arrays to be connected to the server.
Expansion slot 54
PCI slot 2 is not used in the configurations
supported for HP SFS systems.
Expansion slot 25
External option blank6
PCI slot 1 has two internal PCI Express slots; one
of these slots is used for the internal disk controller;
the second slot is not used in the configurations
supported for HP SFS systems.
Expansion slot 17
The NIC 2 port may be used to connect the server
to the site network, a single Gigabit Ethernet
interconnect, both, or neither.
NIC 2 connector8
The NIC 1 port is used to connect the server to the
management network.
NIC 1 connector9
Power supply bay 210
Power cord connector (2) – one for each power
supply
11
Power supply bay 112
The iLO port is used to connect the iLO component
in the server to the management network.
iLO 2 connector13
Video connector14
USB connectors (2)15
Serial connector16
Mouse connector17
Keyboard connector18
2.2.3.2 HP ProLiant DL360 G5 Server Panels
Figure 2-4 shows the HP ProLiant DL360 G5 front panel.
2.2 Administration, MDS, and Object Storage Server Characteristics 49