HP StorageWorks Scalable File Share for SFS20 Enclosure Hardware Installation Guide Version 2.2

Server with Two HP SFS20 Enclosures (1:1 Configuration)”, the MDS server and the administration
server must be ProLiant DL380 servers. This configuration could also be used as an entry-level
configuration.
Figure 1-2 Block Diagram of MDS Server and Administration Server with Four HP SFS20 Enclosures
(2:1 Configuration)
KVM
Switch
TFT5600
Management Network
HP ProCurve Switch
System
Interconnect
DL380
MDS Sever
iLo
NIC1NIC2
PS/2
Interconnect
PCI Adapter
DL380
Administrative Server
iLo
NIC1 NIC2
PS/2
Interconnect
PCI Adapter
SA-6404 (2)
A1 A2 B1 B2
SA-6404 (1)
B2 B1 A2 A1
SA-6404 (2)
B2 B1 A2 A1
SA-6404 (1)
A1 A2 B1 B2
SFS20 Enclosure A B
SFS20 Enclosure A B
SFS20 Enclosure A B
SFS20 Enclosure A B
Port
LED
View
Self
Test
Clear
Reset
Fan
Status
Gig-T
Ports
Mini-
GBIC
Ports
2
8
9
10
23
24
26
25
T
M
T
M
Power
Fault
hp procurve
switch
2650
J4899A
Useonlyone (Tor M) for eachGig abit port
!
Spdmode: off= 10 Mbps, f lash= 10 0 Mbps, on = 1000 Mbps
24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
7
10100Base-=Tx Ports (1 - 24)
1
1.4.1.2 Object Storage Server Block Diagrams
The Object Storage Servers can be ProLiant DL360 servers if either NIC2, the embedded Gigabit
Ethernet controller, or a Dual-port Ethernet Adapter is used as the system interconnect. For use
with Infniband, Myrinet XP or 2XP, or Quadrics QsNet
II
, the Object Storage Servers must be
ProLiant DL380 servers.
Figure 1-3 “Block Diagram of a Pair of DL360 Object Storage Servers with Two HP SFS20
Enclosures using NIC2 as the System Interconnect” shows a block diagram of a pair of DL360
Object Storage Servers with two HP SFS20 Enclosures (1:1 configuration). The system interconnect
uses NIC2, the embedded Gigabit Ethernet controller.
26 Overview