HP StorageWorks Scalable File Share for SFS20 Enclosure Hardware Installation Guide Version 2.2

Note:
The ProLiant DL360 G4 has a USB connection below the power switch. The LEDs are the same.
Table 7-2 ProLiant DL360 G4 Front Panel LEDs
StatusDescriptionLED
Blue = Activated.
Blinking = System remotely managed.
Off = Deactivated.
Unit identification (UID)1
Red = System critical. View system board LEDs to identify component in
critical state.
Amber = System degraded. View system board LEDs to identify component
in degraded state.
Green = Normal.
Internal health2
Amber = Power redundancy failure.
Green= Normal.
External health (power
supply)
3
Green = Network link.
Blinking = Network link and activity.
Off = No link to network. If power is off, view the rear panel RJ-45 LEDs.
NIC 1 link/activity4
Green = Network link.
Blinking = Network link and activity.
Off = No link to network. If power is off, view the rear panel RJ-45 LEDs.
NIC 2 link/activity5
Amber = System shut down but power is still applied.
Green = System on.
Off = Power cord not attached or power supply failed.
Power on/standby button6
7.1.3 HP ProLiant DL360 G5 Rear Panel LEDs and Buttons
The HP ProLiant DL360 G5 rear panel LEDs are shown in Figure 7-3.
Figure 7-3 ProLiant DL360 G5 Rear Panel LEDs
94
7 8
5 6
1 3
2
Table 7-3 ProLiant DL360 G5 Rear Panel LEDs and Buttons
StatusDescriptionItem
Green = Activity exists.iLO 2 NIC activity LED1
Flashing green = Activity exists.
Off = No activity exists.
7.1 HP ProLiant DL360 LEDs 81