HP StorageWorks Scalable File Share for SFS20 Enclosure Hardware Installation Guide Version 2.2

5 Using the Keyboard, Video, and Mouse Switch
To install and operate the servers in an HP SFS system, you must be able to select the
administration or MDS server from the KVM switch. You can select the servers based on name,
electronic identification number (EID), or port number.
This chapter discusses how to set the server name, and how to select the administration or MDS
server.
5.1 Assigning Server Names
To set the server name on the KVM switch, follow these steps:
1. Access the on-screen display (OSD) main dialog box by pressing the Print Scrn key or by
pressing the Ctrl key twice within 1 second. The main dialog box (Figure 5-1 “KVM Main
Dialog Box”) is displayed.
Figure 5-1 KVM Main Dialog Box
2. Click the Setup button. The Setup dialog box (Figure 5-2 “KVM Setup Dialog Box”) is
displayed.
Figure 5-2 KVM Setup Dialog Box
3. In the Setup dialog box, click the Names button. The Names dialog box (Figure 5-3 “KVM
Names Dialog Box”) is displayed.
5.1 Assigning Server Names 71