HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

Nagios folder Chapter 2: Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-69
Some Program Information chart variables appear in the Process Commands box as
commands to change current values.
Process State Information chart
Process Commands box
Use the Process Commands box to run commands that perform actions. These
actions are global, affecting all hosts and services. For example, if you disable
notifications here, no notifications are sent for any hosts or services.
Commands with an adjacent X icon ( ) or check-mark icon ( ) are
toggles. The icon indicates the new toggle state (after command execution): a
check mark means enable or start; an X means disable or stop.
Click a command link to display the
External Command Interface view for the
command. See
External Command Interface view , on page 2-143.
Last Log File Rotation Time and date of latest event log file rotation. During
daily rotation, file is copied from the log directory (
/var/
log/nagios
) to the log archive directory (/var/log/
nagios/archives
).
Log file is of limited size; when full, oldest log entries are
discarded to make room for new entries. Log file is
rotated daily to provide a record of past entries.
Table 2-49: Process State Information chart, Nagios Info view
Variable Description
Process Status Status of monitoring process (Nagios). Should be OK. If not,
use the command Restart the Nagios process. See
Process
Commands box
, on page 2-69 . Process status values are the
same as service status values. See
Host and service status
values
, on page 2-14 .
Table 2-48: Program Information chart, Nagios Info view (continued)
Variable Description