HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

Host Information view Chapter 2: Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-129
Table 2-113: Host Commands section, Host Information view
Command Link Description
Disable checks of a specific host Temporarily prevents Nagios from checking a
particular host’s status. If Nagios must check
host’s status, it assumes the host is in the same
state it was in before checks were disabled.
Enter information in the Host Name field.
Acknowledge a specific host
problem
Note: This option appears only if the host status is
not OK.
Acknowledges host problems. Future notifications
about problems are temporarily disabled until host
changes state (for example, recovers). Contacts for
host receive an acknowledgement notification, so
they are aware someone is working on the problem.
A comment is also added to host. Enter your name
and a brief description of your actions in the
comment field.
The following fields are required:
• Host Name
• Author (Your Name)
• Comment
To send acknowledgement notifications to
appropriate contacts, select the Send Notification
check box.
To retain comments between Nagios restarts, select
the Persistent check box.
Disable notifications for a specific
host
Prevents notifications from being sent for specified
host. You must re-enable notifications for host
before alerts are sent again. This command does
not disable notifications for services associated
with host.
Enter information in the Host Name field.