HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

LO
Chapter 2: Persist Control Center PCC Views, Detailed Descriptions
2-78 HP StorageWorks Reference Information Storage System Administrator Guide, April 2004
Links from the Application Manager view: none.
Replication
You use the Replication view to monitor and start or stop replicating a domain
on a remote system. Replication status is updated after each polling cycle, so
it could be up to 5 minutes after you start replication before you see the
results on the graph of replication rates. Errors and warnings, however, are
displayed as soon as they happen on the system. (The
Replication view is
unavailable until at least one domain on the PCC host system is configured
for replication.)
The failure of a replicated smart cell triggers the allocation of new primary
and secondary smart cells on the replica site. When the original site returns
to service, it automatically becomes the replica site for the new primary and
secondary smart cells. Depending on the configuration, some administration
may be necessary for continued data storage. Specifically, if the system uses
Email Mining, the replica site mining servers must be configured and enabled
to start mining to the replica site.
If the primary site is not available for queries, end-users must enter the
address of the replica site, instead of the primary site, in their browsers.
The features of the
Replication view are described in the following table.
Table 2-80: Links To the Application Manager View
Origin Link
left menu
Application Manager