HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 2: Platform Control Center User Management view (Dynamic Account Synchronization)
2-32 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
15. Click Update .
16. Return to the
User Management view, and click Job Assignments . The Job
Assignments
view appears.
17. Click
Create . An entry form appears.
18. In the
ConfigID list, select DAS configuration to be run on the portal.
19. In the
DAS Server IP field, enter IP address of HTTP portal where the DAS
service runs selected DAS configuration.
20. Select
Yes for Configuration Enabled .
21. In the
Period (mn) field, enter number of minutes to occur between runs of
selected DAS configuration. A period of
0 means the job runs once.
22. Do not change the defaults for the
Configuration running state and DAS server
running state
fields. These fields are for future use.
23. Click
Update .
24. In the
Configuration Command Panel , select Yes for Initialize DAS setup.
Select Yes only when scheduling or starting DAS configuration for the
first time, or to resynchronize the database to recover from an unusual
event.
25. Click
Start to run DAS configuration immediately.
26. After DAS updates the database, go to the
Configuration Command Panel ,
and select
No for Initialize DAS setup.
27. Click Schedule to run DAS configuration periodically.
Delete USNChanged USN in deleted users directory the last time DAS ran. For
initial Reference Information Storage System setup, set
this value to “0”. Thereafter, do not change this value.
To change this value, stop all scheduled jobs for this DAS
configuration. Use the Configuration Command Panel in the
Job Assignments view (see
Starting or scheduling DAS jobs ,
on page 2-34
).
Table 2-17: User Management view, job mappings form (continued)
Field Description