HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

View Config view Chapter 2: Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-107
View Config view
This view shows system configuration from different viewpoints, based on
different object types. You can examine
system parameters as defined when
system was configured. You
cannot change any parameters; they are read-
only.
This view always shows RISS settings made at system configuration/instal-
lation. This means that even though you can dynamically change some
parameters displayed in the
View Config view using other PCC views (for
example, enabling/disabling host checking), the
View Config values do not
reflect these changes.
You choose the object type to display using the
Object Type pull-down list at
the upper right.
Table 2-89: View Config view features, hosts
Feature Description
Host Name Host’s name. Example: sc-s2-204-4.
Alias/
Description
Host’s long name or description. Example: SmartCellMachines:sc-s2-
204-4.ourcompany.com.
Address Host’s IP address. Example: 10.0.204.4.
Parent Hosts Host’s parents. Example: cr-s0-96-4, cr-s0-96-3.
Note: The only RISS hosts that have parent hosts are HTTP portals
and smart cells (cloud routers are their parents).
Notification
Interval
This is always No Renotification, meaning only one notification is sent
when a host is detected as having a problem (see next).
Notification
Options
Host status values that can cause notifications to be sent: DOWN,
UNREACHABLE, and RECOVERY, where RECOVERY represents a
transition from a problem status value (DOWN or UNREACHABLE) to
the normal status value (UP).
Notification
Period
Name of defined notification period: always, which means
notifications can be sent any time; they are sent immediately.
Click link to display definition of the always period. See
View Config
view features, time periods
, on page 2-111 .