HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Validating file from command line
Enter the HPPSTInit command with parameters to validate an Archive Request file:
<install_path>/HPPSTInit /i ArchiveRequestFileName.xml /o LoadLogFile-
Name.log [/c
] [/v5]
Parameter
Description
/i Required. Name of input file to be processed.
Replace ArchiveRequestFileName.xml with the full UNC path and XML
file name.
/o Required. Na
me of Archive Request Loader log file to which diagnostic and
processing information is written.
Replace Loa
dLogFileName.log with the full UNC path and log file name.
/c Optional. Parses XML structure in input file for syntax and file accessibility only.
No records are added to PST.MDB for processing.
/v Optional. Verbosity level used when processing Archive Request file. Enter a
number from 0 to 5 following the /v to indicate verbosity level, 5 containing
the most detail.
• 0: Fatal
• 1: Alert
• 2: Warning
• 3: Information
• 4: Trace
• 5: Debug
PST Import Monitor
Use PST Import Monitor to:
• Startandstoptheimportprocess.
• Displ
ay an overview of running tasks, message counts, and other status information showing
import progress.
• Draw attention to potential error conditions.
• Gener
ate reports.
• Reset failed processes.
Using PST Import Monitor
1. To run PST Import Monitor, select one of the following methods:
•SelectStart > Programs > Hewlett-Packard > RISS PST Importer > Import Monitor.
• From the command line, enter the following command: <install_path>/HPPSTStats.
The following window appears:
90 PST Importer