HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Figure 21 Creating a new file
3. Click Add, and select the PST files.
Only files in the Select Files To Process list are imported. In the file you are creating, the
corresponding XML tags are <FileSpecList> and <FileSpec>.
4. To import PST files larger than 150 MB, edit the following setting in RISS PST Importer.ini
to reduce performance degradation and increase throughput:
[PSTLaunchMgr]
MaxProcesses=1
5. If necessary, select PST files you d o not want to process, and click Remove.
6. In the Select Output File box, enter the path and file name of the file you are creating or revising, or
click Browse to navigate to a location.
7. Enter MAPI logon and RISS location information in the following boxes:
• Exchange Server: Exchange ser ver used when accessing the GAL for address resolution.
The XML tag is <Server>.
• Mailbox: Mailbox on Exchange server used when accessing the GAL for address resolution.
The XML tag is <Mailbox>.
• SMTPHost: DNSnameorIPaddressoftheRISSSMTPportalusedtosubmitmessagesto
RISS. The XML tag is <SMTPServer>.
• Port: SMTP port number. This setting is optional and the default is 25. The XML tag is
<SMTPPort>.
• HTTP Host: Domain name or IP address of the RISS HTTP server queried when checking for
duplicate messages. The XML tag is <HTTPServer>.
• Domain: RISS domain used when checking for duplicate messages to be submitted. RISS
domain is case-sensitive and must m atch the domain name in Domain.jcml.TheXML
tag is <RISSDomain>.
• Repository: Repository into which documents in the Select Files To Process list are d elivered.
The XML tag is <Repository>.
88 PST Importer