HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Installing PST I
mporter
Installation requirements
Before installing PST Importer, verify that you m eet the following requirements.
Client hardw ar
erequirements
Client machine
with 512 MB RAM and 200 MB free disk space.
Client software requirements
• Windows 2000 or later. Highly recommended:WindowsXP.
• Outlook 2000 or later. Highly recommended:Outlook2003.
NOTE:
If you use Outlook 2003, also install Service Pack 1 for the Outlook plug-in to work correctly.
• Collaboration Data Objects (CDO) installed.
RISS software requirements
• Audit repository that receives log files and status reports.
• SMTP access for client machine.
Network requirements on client machine
• Access to the RISS HTTP portal without proxy.
• Access to Exchange mailbox for Global Address List (GAL) name resolution.
• Read/Write access to PST files to be imported.
• Access to Outlook and Exchange without logon prompts.
Installation procedure
To install PST Importer on a client machine:
1. Verify that client machine meets installation requirements.
HP highly recommends using Outlook 2003 on Windows XP. See Installation
requirements on page 86.
2. On the client machine, run the setup.msi installation file provided by your HP service
representative.
3. Follow the instructions in the installation wizard, and accept all defaults.
NOTE:
The installation wizar d installs Microsoft’s .NET Runtime support if necessary.
86 PST Importer