HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Changing the reprocessing status
You can enable or disable a reprocessing schedule of a specific domain or all the domains listed.
To change a repro
cessing schedule:
1. In the Reprocessing view, locate the domain whose schedule you want to enable or disable.
2. Complete any of the following tasks to change the status:
Figure 15 Change the reprocessing status
To enable reprocessing for a specific domain, select the corresponding Reprocessing Status
check box.
To disable reprocessing for a specific domain, clear the corresponding Reprocessing Status
check box.
To enable reprocessing for a ll domains, click Resume All.
To disable re processing for all domains, click Suspend All.
3. Verify the status by noting the text Disabled or Enabled next to the Reprocessing Status check box.
Using the Reprocessing Utility
You can reprocess a user repository if you think a user hasn’t been included in the processing.
In the Reprocessing Utility area of the view:
Figure 16 Reprocessing utility
1. Enter the following information in the text boxes:
The user email address
•TheuserrepositoryID
Users can only be reprocessed if their email address and repositor y are in the RISS system. If so, they
are listed in the Account Manager.
2. In the Domain Name drop-down list, select the domain in which the user repository resides.
3. Specify a date range, and click Add in Reprocessing Queue.
Thejobissenttothequeue,andthereprocessingtakesplace24hourslater.
Viewing reprocessing h istory logs
The reprocessing history log at the bottom of the Reprocessing view shows a list of the last successful
repro cessing runs for each configured domain. The log includes each domain group, when a domain
was reprocessed last, and the number of processed files. This report is based on data from smart cell
groups, which is averaged from the individual smart cells of each group.
66
Data management