HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

8 D ata man ag em ent
This chapter discusses the following topics:
•
Replication, page 61
•
Smartcell Cloning, page 63
•
Reprocessing ,page65
•
Repository level retention,page67
•
Database and data backup, page 69
Replication
NOTE:
This view is available only if a replicated system is configured.
Use the Replication view to monitor and to start or stop replication for a domain on a remote system.
Replication status is updated after each polling cycle. Therefore, it could be up to 5 minutes after you
start replication before you see results on the graph of replication rates. E rrors and warnings, however,
are displayed as soon as they happen on the system. (The Replication view is unavailable until at least
one domain on the PCC host system is configured for replication.)
A failed replicated smart cell triggers allocation of new primary and secondar y smart cells on the replica
site. When the original site returns to service, it automatically becomes the replica site for new primary
and secondary smart cells. Depending on configuration, some a dministration might be necessary for
continued data storage. Specifically, if the system uses Selective Archiving, the replica site mining servers
must be configured and enabled to start mining to the replica site.
If the primary site is not available for queries, users must enter the address of the replica site, instead
of the primary site, in their browsers.
NOTE:
In order for the Replication view to display statistics from the remote system, a RISS remote
authorization user must be set up in Account Manager. See RISS Remote Authorization in User account
information on page 50.
Table 34 Link to Re plication view
Origin
Link
left menu
Data Management > Replication
Reference Information Storage System Version 1.5
61