HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)
Firewall Settin
gs
The Fire w all Se
ttings view shows the firewall settings for the PCC server and the RISS HTTP portals, and
their virtual IP (VI P) addresses.
It includes the following information:
Table 19 Firewa
ll port s
Feature
Description
Virtual IP The virtual IP address.
Port
The port number
.
Service
The service running on the port.
Type
The transfer protocol used on the port: TCP or UCP
Inbound/Outbound
Shows if the fi
rewall is
enabled or disabled on the port’s inbound
and outbound t
raffic. Outbound traffic is not filtered on the PCC server
ports.
Table 20 Link t
oFirewallSettingsview
Origin
Link
left menu Configuration > Fir ewall Settings
SSL Configuration
SSL,orSecureSocketLayer,isatechnologythatallowswebbrowsersandwebserverstocommunicate
over a secured connection. This means that the data being sent is encrypted by one side, transmitted,
then decrypted by the other side before processing. It is a two-way process, meaning that both the ser ver
AND the browser encrypt all traffic before sending out data.
The SSL Configuration view lets you generate certificate signing requests (CSRs) , and corresponding
private keys, for secured connections on the RISS. You can create two types of CSRs: one for access to the
PCC portal, and one for access to the HTTP portals.
After generating the CSRs, see Installing a third party certificate on the PCC portal onpage38and
Installing a third party cer tificate on the HTTP portals on page 38 for the steps needed to complete
the process.
The SSL Configuration view contains two areas. The top area shows any current certificate signing
requests in the system . The bottom area contains a form to complete to generate a certificate signing
request (CSR) and RSA private key.
Table 21 Link to SSL Configuration view
Origin
Link
left menu Configuration > SSL Configuration
36
Configuration