HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Figure 36 Scheduling an event
4. To select an event type, click the down arrow to see the types that are supported. Select an event
type and click OK.
Figure 37 Types of events
A window appea rs indicating that a companion rule for this event has been created in the Mail Attender
for Exchange database. This rule must be edited using the Mail Attender for Exchange console interface,
in order to add the information stores that should be included in processing the scheduled event.
Enabling load balancing message by message
A non-sticky port (port 81) is provided to allow load balancing of hash lookups on a message-by-message
basis for client applications.
To make an email miner use the non-sticky port:
1. Start the EMS Scheduler application.
2. Find a mailbox mining event.
3. Find the DocRef Host setting. This should contain the IP address/Host name of a VIP.
4. Add the port number by appending a colon followed by the port number to the IP address/Host
name. For example:
DocRef Host: HTTPHOST: 81
5. Click Apply.
6. Close the EMS Scheduler application.
7. Restart the Launch Manager service to make the new setting take effect.
Repeat this procedure as needed for all mailbox mining events.
Enabling a scheduled event
After a new event has been created, it must be edited to enable it a nd set other parameters.
IntheScheduleEventsMaintenancewindow,clickEdit. The edit window that appears is specific to
the selected event type.
124
Configuring Outlook or Lotus Notes