Manualshelf

HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Reference Information Storage System Base System
161162163164165166167168169170
Example 1. tsm: I NTERNAL>query drmstatus
tsm: INTERNAL>query drmstatus
Recovery Plan Prefix: C:\PROGR AM FI LES\TIVO LI\TSM;\SERVER1\RECPLANS\
Plan Instructions Prefix: C:\PROGRAM FILES\TIVOLI\TSM\;\SERVER1\RECINSTR\RPP
Replacement Volume Postfix: @
Primary Storage Pools: SP.GROUP.PRI.OPTICAL
Copy Storage Pools:
Not Mountable Location Na m e: N OTMOUNTABLE
Courier Name: Joe’s cour ier service
VaultSiteName:Ironvault,somewhere
DB Backup Series Expiration Days: 60 Day(s)
Recovery Plan File Expiration Days: 60 Day(s)
Check Label?: Yes
Process FILE Device Type?: No
Command File Name: C:\TSMBACKUP\EXEC.CMD
2. Back up storage pools (only the ones for smart cell group data).
a. Define a storage pool for the media that will be used for the backup:
tsm: INTERNAL>define stgpool disaster-recovery DC.OPTICAL
pooltype=copy maxscratch=50
b. Perform the backup of the client data:
tsm: INTERNAL>backup stgpool SP.GROUP.PRI.OPTICAL disaster-
recovery maxprocess=1
It is assumed that the process used volume OPTICAL.2 for backup data, since OPTICAL.1
contains the client data.
3. Perform a full backup of the database:
tsm: INTERNAL>backup db type=full devclass=DC.OPTICAL
Volume OPTICAL.3 was used for the database backup.
4. Move backup volumes offsite.
a. This command should list the volumes OPTICAL.2 and OPTICAL.3:
tsm: INTERNAL>query drmedia * wherestate=mountable
b.
tsm: INTERNAL>move drmedia * wherestate=mountable
Volumes OPTICAL.2 and 3 were moved to the exit port of the library; their state was set to
notmountable.
c. This marks the state of the two volumes as courier:
tsm: INTERNAL>move drmedia * wherestate=notmountable
d. Markstateofthevolumesasvault:
tsm: INTERNAL>move drmedia * wherestate=courier
5. Create the recovery plan file and copy it to a safe location. This file includes the configuration
inf ormation.
a. Create the directory c:\tsmbackup on the backup server.
b.
tsm: INTERNAL>prepare planprefix=c:\tsmbackup\recplan
This process creates a single file that contains instructions, macros, the Volume History,
Device Configuration, a nd Server Options file.
6. Use this procedure to manually back up the configuration:
a. Back up the volume history file:
tsm: INTERNAL>backup volhistory filenames=c:\tsmbackup\volhis-
tory
Reference Information Storage System
167