HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 2: Platform Control Center Monitoring folder
2-66 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
Disabling notifications by scheduling service or host downtimes
1. In the Scheduled Service Downtime or the Scheduled Host Downtime section,
click
Schedule service downtime or Schedule host downtime . The External
Command Interface
appears.
2. In the
Command Options section, enter the following information:
– Host Name
– Service (appears in the Schedule service downtime only)
– Author (Your Name)
– Comment
– Start Time
– End Time
Note: Fields in red, including Comment , are required. If you do not enter
a comment, you are informed that “an error occurred while
processing your command.”
3. To limit downtime to specified start and end times, click to select the
Fixed check box.
To use flexible downtime for service, leave the
Fixed check box
unselected, and enter information in the
Duration fields.
Note: When Fixed is not selected, scheduled downtime is flexible: it
starts between specified start and end times as soon as a
problem is detected (
UNREACHABLE or DOWN status value for
host, non- OK for service).
4. Click
Commit to save changes, or click Reset to clear input fields.
Table 2-47: Links from Host Downtime view
Destination Link
External Command Interface view , on page 2-143 Schedule host/service downtime