HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

LO
Chapter 2: Persist Control Center PCC Views, Detailed Descriptions
2-106 HP StorageWorks Reference Information Storage System Administrator Guide, April 2004
Service Information
The Service Information view provides status information for a given service, as
described in the following table.
Table 2-110: Service Information View Features
Feature Description
heading Name of the service. Full and abbreviated names of this host, as well
as host IP address. See
Host Information , page 2-103.
Service State
Statistics
The amount and percentage of time this service has had each service
status value; and the total time. See
Service Status Value Definitions ,
page 1-7.
Service
Commands
To run a command to perform an action on this service, click the
corresponding command link. This displays the External Command
Interface view for the command – see
External Command Interface ,
page 2-114.
Note: Commands that disable (notifications, status checks, and so
on)
override commands that enable. For example, suppose you
disable checks for a particular service such as PING using the Service
Information view (command Disable checks of this service), but you enable
checks for all services using the Nagios Info view (command Start
executing service checks). The particular service (PING) is
not checked,
because disabling overrides enabling.
Service
Comments
All comments for this service. Comments are notes you make to
yourself or other system administrators. The following information is
shown for each comment:
• Entry Time – Time that the comment was added.
• Author – Who entered the comment.
• Comment – The comment text.
• Comment ID – Unique sequential identifier, incremented whenever a
new comment is added.
• Persistent – Yes. PCC comments are always persistent.
• Actions – Click the wastebasket icon ( ) to delete this comment.
To add a new comment for this service, or delete all comments for this
service, click the appropriate link. This displays the External Command
Interface view, where you enter the new comment or confirm deletion –
see
External Command Interface , page 2-114.