X520 1U Power Adapter Shelf Installation Instructions

Remove the Shelf

1. Prepare for shelf removal as follows:

a. Disconnect and remove the power adapter and cables.

b. If a cable tie is used to secure the adapter power cord to the device, remove the cable tie.

c. Remove the power adapter by sliding it out from the end of the retention clip.

2. Remove the shelf from the device as follows:

a. Unscrew the two thumbscrews (1) that attach the shelf assembly to the device. Carefully slide this side

of the shelf off first.

b. Disengage the alignment pins on the other side of the shelf assembly (2), and slide the entire assembly

away from the device.

The information herein is subject to change without notice.

Printed in China

September 2011

Part Number: 5998-2733

*5998-2733*

5998-2733_X520_Power_Shelf_InsI_Sept08-2011.fm Page 2 Thursday, September 8, 2011 1:09 PM