HP Brocade Host Bus Adapters and Driver Installation Guide (AA-RWQ0D-TE, March 2012)

B HBA specifications
This chapter describes HBA specifications.
Environmental and power specifications
Table 8 (page 23) lists environment and power specifications for the HBAs.
Table 8 Environmental and power specifications
SpecificationProperty
None requiredAirflow
0°C to 50°C (32°F to 122°F)Operating temperature (dry bulb)
5% to 93%
nl
Operating humidity
(relative-noncondensing)
-43°C to 73°C (-40°F to 163°F)Nonoperating temperature
5% to 95%
nl
Nonoperating humidity
(relative-noncondensing)
6.3 W
nl
Power dissipation
Maximum, not including SFP. Reduced in green power mode.
3.3 V operationOperating range
Physical specifications
The HBAs are low-profile MD2 form factor PCIe cards that are shipped with a standard profile
bracket installed, and a low profile bracket included, for mounting in your host system.
Table 9 HBA mounting brackets
DimensionBracket type
1.84 cm x 12.08 cm (0.73 inches x 4.76 inches)Standard
16.765 cm x 6.89 cm (6.6 inches x 2.714 inches)Low profile
Fiber optic cable
Table 10 (page 23) summarizes maximum distances supported for different fiber optic types. This
table assumes a 1.5 dB connection loss and an 850 nm laser source.
Table 10 Fiber optic cable specifications
OM3 (M5E) Laser-optimized
50/125 micron
OM2 (M5) Standard 50/125
micron
OM1 (M6) Standard 62.5/125
micron
Port speed
150 m50 m50 m8 Gb/s
380 m150 m70 m4 Gb/s
500 m300 m150 m2 Gb/s
Environmental and power specifications 23