XPInfo v19.00.00 release notes (T1798-96302, March 2010)

• Parameters, dyntrk is set to yes and fc_error is set to fast_fail
Notes
Following are a few notes on XPInfo 19.00.00:
• XPInfo recognizes LUNs provided by only Hewlett-Packard (HP). It does not recognize LUNs
provided by other vendors.
• If you are using XP Performance Advisor AIX host agent, view the SLPR and CLPR information for
your XP disk arrays through XP Performance Advisor, as XPInfo for AIX host agent does not display
the CLPR and SLPR information.
• If you are using XP Performance Advisor Solaris or HP-UX host agent, view the SLPR and CLPR in-
formation for your XP disk arrays through XP Performance Advisor, as XPInfo for these host agents
displays random CLPR and SLPR values (example of random values are 256, 122, or zero).
To view the SLPR and CLPR values through XP Performance Advisor:
1. On the XP Performance Advisor Home page, click Array View in the left pane.
2. Click the + sign for Arrays.
3. From the list of XP arrays that are monitored by XP Perf Advisor, click the + sign for the XP
array, for which you want to view the related SLPR and CLPR data.
4. Select LDEV from the list displayed.
5. On the Array View LDEV screen, select the Column Settings check box.
6. In the LDEV Column Settings list, select the check box for SLPR and CLPR.
7. In the LDEV table, click the LDEV ID column heading and provide the cu:ldev ID for which you
want to view the SLPR and CLPR data.
8. Click OK.
The corresponding SLPR and CLPR data for the cu:ldev ID is displayed under the respective column
headings (SLPR and CLPR) in the LDEV table.
XPInfo Release Notes 5