XPInfo Release Notes Part number: T1789-96087 Second edition: December 2009
Legal and notice information © Copyright 2009 Hewlett-Packard Development Company, L.P.
Version: 18.00.00 Description XPInfo is a command line utility provided with HP StorageWorks XP Performance Advisor Software and Array Manager Software. It is used to obtain information about LUNs exposed to XP arrays. This document describes the XPInfo 18.00.00 enhancements, fixes, limitations and other additional information.
• Window: HP DSM v2.00.02 • HP-UX • HP-UX 11.31: Native multipathing • Earlier versions of HP-UX: Secure Path 3.0F.02F.02F.patch • Linux: HDLM 5.9.3.01 and VERITAS Storage Foundation 5.0 Vmware ESX • • • • • ESX ESX ESX ESX ESX 3.5 (x64) 3.5 (x64) (Service Pack U2) 3.5 (x64) (Service Pack U3) 3.5 (x64) (Service Pack U4) 4.0 (x64) NOTE: Multipathing is enabled. Firmware requirements Table 1 describes the minimum firmware requirements.
• XPInfo can now recognize device files with additional block and raw device files created using mksf. • The disk mechanics information for XP24000, XP12000, and XP10000 arrays with RAID 6 support is now displayed correctly. Known issues XPInfo 18.00.00 has the following known issues: • ESX 3.5 does not display multiple paths for all LDEVs. NOTE: XPInfo 18.00.00 displays the same LDEVs because different entries of the ESX 3.5 native multipath software does not detect the various paths to that LDEV.
