HP XPWatch and HP XPSketch Reference Guide

CPU performance metrics
Table 23 describes the CPU performance metrics.
Table 23 CPU performance metrics
DescriptionUnitPerformance
metrics
Serial number of the arraynumberSer
CH slot number.
For XP7 and P9500 disk arrays, the slot refers to the MP blade
location.
stringSlot
Figure 23 shows the slots are shown as 1MA and 2MA
CH PCB type (Fibre/SCSI/DKA).
For XP7 and P9500 disk arrays, the type is displayed as MPPK.
stringType
For an XP disk array, Min% indicates the minimum CPU utilization
on PCB [%].
For XP7 and P9500 disk array, Min% indicates the minimum
processor utilization on an MP blade. In Figure 23 the Min%
indicates the utilization of MP0.
%Min%
For an XP disk array, Max% indicates the maximum CPU utilization
on PCB [%].
For XP7 and P9500 disk array, Max% indicates the maximum
processor utilization on an MP blade. In Figure 23 the Max%
indicates the utilization of MP0.
%Max%
For an XP disk array, Avg% indicates the average CPU utilization
on PCB [%].
For XP7 and P9500 disk array, Avg% indicates the average
utilization of all MPs. In Figure 23 the Avg% indicates the
utilization of all MPs in the MP Blade.
%Avg%
For an XP disk array, MP0 is the CHA PCB Busy Time for CPU 0
(if installed).
For XP7 and P9500 disk array, MP0 is the MP busy time for CPU
0 (if installed).
numberMP0
For an XP disk array, MP1 is the CHA PCB Busy Time for CPU 1
(if installed).
For XP7 and P9500 disk array, MP1 is the MP busy time for CPU
1 (if installed).
numberMP1
For an XP disk array, MP2 is the CHA PCB Busy Time for CPU 2
(if installed).
For XP7 and P9500 disk array, MP1 is the MP busy time for CPU
2 (if installed).
numberMP2
For an XP disk array, MP3 is the CHA PCB Busy Time for CPU 3
(if installed).
For XP7 and P9500 disk array, MP3 is the MP busy time for CPU
3 (if installed).
numberMP3
For an XP disk array, MP4 is the CHA PCB Busy Time for CPU 4
(if installed).
For an XP7 disk array, MP4 is the MP busy time for CPU 4 (if
installed)
numberMP4
For an XP disk array, MP5 is the CHA PCB Busy Time for CPU 5
(if installed).
For an XP7 disk array, MP5 is the MP busy time for CPU 5 (if
installed).
numberMP5
50 Viewing performance metrics in HP XPWatch