HP XPWatch and HP XPSketch Reference Guide

3. Select the required port.
4. Enter the c command. The Pick LDEVs/RAID Groups Selection Scheme appears.
• Filtering LDEVs by RAID Groups
Follow this procedure to filter LDEVs by RAID groups:
a. Enter 1 to select this option. The RAID groups within the host groups are displayed.
b. Select the required RAID groups.
c. Enter the c command. The LDEVs within the RAID groups are displayed.
d. Select the required LDEVs.
e. Enter the c command. The following message appears:
Would you like to archive the performance data collected?(Y/N)
f. Enter Y to save the performance data in .CSV format. The Output screen appears.
NOTE: The Output screen displays performance data of all selected host groups,
ports, LDEVs, RAID groups, DKCs and processors belonging to the selected array.
g. Enter e or press Ctrl+C to quit HP XPWatch.
• Filtering RAID Groups by LDEVs
Follow this procedure to filter RAID groups by LDEVs:
a. Enter 2 to select this option. The LDEVs within the host groups are displayed.
b. Select the required LDEVs.
c. Enter the c command. The RAID groups within the LDEVs are displayed.
d. Select the required RAID groups.
e. Enter the c command. The following message appears:
Would you like to archive the performance data collected?(Y/N)
f. Enter Y to save the performance data in .CSV format. The Output screen appears.
NOTE: The Output screen displays performance data of all selected host groups,
ports, LDEVs, RAID groups, DKCs, and processors belonging to the selected XP or
XP7 disk arrays.
g. Enter e or press Ctrl+C to quit HP XPWatch.
• Manually Adding RAID Groups and LDEVs without filtering
Follow this procedure to manually add RAID groups and LDEVs without filtering:
a. Enter 3 to select this option. The RAID groups are displayed.
b. Select the required RAID groups.
c. Enter the c command. The LDEVs are displayed.
d. Select the required LDEVs.
e. Enter the c command. The following message appears:
Would you like to archive the performance data collected?
(Y/N)
f. Enter Y to save the performance data in .CSV format. The Output screen appears.
NOTE: The Output screen displays performance data of all selected host groups,
ports, LDEVs, RAID groups, and processors belonging to the selected XP or XP7 disk
arrays.
g. Enter e or press Ctrl+C to quit HP XPWatch.
38 Viewing performance metrics in HP XPWatch