HP XPWatch and HP XPSketch Reference Guide

Settings menu
The Settings menu enables you to modify the settings.
This menu includes:
• “Menu settings” (page 35)
• “Performance data collection settings” (page 35)
Figure 19 shows the Settings menu.
Figure 19 Settings menu
Menu settings
Menu settings enable you to modify the settings of the interface.
For example, the Menu settings allow you to modify the appearance of the menus.
Table 10 describes the Menu settings.
Table 10 Menu settings
Valid RangeDefault ValueFunctionsSettings
1-50 lines20 linesChanges the number of items that appear in the menu.Menu Height
NADisabledDebug Mode
• If this mode is enabled, the program creates a file
XPWatch.log that stores information about the
execution cycle of HP XPWatch and places it in the
folder where HP XPWatch is located.
• If this mode is disabled, information about the execution
cycle of HP XPWatch is not saved.
• If this mode is enabled, the system prompts to specify
the level of debugging. Since the recommended Debug
level option is INFO, enter 3.
NADeletes the cache
files
Deletes any stored information about an array that is
located on the local system.
Force Cache
Mode
Performance data collection settings
Performance data collection settings enable you to modify the settings of the output screen. It also
enables you to modify the time interval for data collection.
Table 11 describes the Performance data collection settings.
Menus 35