HP XPWatch and HP XPSketch Reference Guide

4. Select the required host and enter the c command. The Port menu showing all ports connected
to the hosts appears.
5. Select the required port and enter the c command. The Pick LDEVs/RAID Groups Selection
Scheme screen appears.
RAID Group menu
The RAID Group menu lists the details of all RAID groups connected to the selected host(s).
Figure 17 shows the RAID Group menu.
Figure 17 RAID Group menu
Table 8 describes the fields that appear in the RAID Group menu.
Table 8 RAID Group menu — screen fields
DescriptionScreen field
Selection numberNum
The Rg column displays the Parent RAID group if the RAID
groups are “Concatenated”
Rg
RAID levelLevel
RAID typeType
Drive type of Hard Disk Drives constituting the RAID groupHDD
Speed of the Hard Disk Drives (HDD) in rpmRpm
Total number of LDEVs belonging to the RAID groupLDEV#
Total number of CHA ports associated with the RAID groupCp#
Total number of host groups associated with the RAID groupHg#
Count of DKAs associated with LDEVs mapped to portDKA#
The Pg column displays the entire list of concatenated RAID
groups
Pg
NOTE:
• If the RAID groups are not configured, the RAID Group menu will display blank screen fields.
• For non-concatenated RAID groups, the Rg and Pg columns display the same data.
• HP XPWatch supports RAID 6 (14D+2P) parity groups.
Menus 33