HP XPWatch and HP XPSketch Reference Guide

Table 7 Port menu — screen fields (continued)
DescriptionScreen field
Count of LDEVs mapped to the portLDEV#
Count of unique LDEVs mapped to the portLh#
Viewing Port menu
To view the ports connected to a host, perform the following steps:
1. Start HP XPWatch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key.
3. The Available Host Groups screen displaying the list of host groups connected to the array
appears.
4. Select the required host and enter the c command.
The Port menu showing all ports connected to the hosts appears.
Pick LDEVs/RAID Groups selection scheme
Most arrays include a large number of LDEVs and RAID groups. The Pick LDEVs/RAID Groups
Selection Scheme enables you to sort LDEVs and RAID groups according to your requirements.
This menu supports the following options:
• Filter LDEVs by RAID groups
• Filter RAID groups by LDEVs
• Manually add RAID groups and LDEVs without Filtering
• Skip and start collecting
Figure 16 shows the Pick LDEVs/RAID Groups selection scheme.
Figure 16 Pick LDEVs/RAID Groups selection scheme
Viewing Pick LDEVs/RAID Groups selection scheme
To view this screen, perform the following steps:
1. Start HP XPWatch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key.
3. The Available Host Groups screen displaying the list of host groups connected to the array
appears.
32 Working with HP XPWatch menus and commands