HP XPWatch and HP XPSketch Reference Guide

Port menu
The Port menu lists all the ports that are connected to the selected host groups. This menu is used
to select the port whose performance needs to be monitored or captured.
Figure 15 shows the Port menu.
Figure 15 Port menu
Table 7 describes the fields that appear in the Port menu.
Table 7 Port menu — screen fields
DescriptionScreen field
Selection numberNum
Port numberPort
Slot numberSlot
Type of port (SCSI, Fibre, iSCSI, ENAS, FCoE)Type
Connection type (N for point-point, NL for FC-AL)Topo
Fabric login (Y/N)FLOGI
Operating mode of the port (Target, MCU Initiator, RCU Target, e-LUN initiator)Mode
Security switch (On/Off)Secu
Storage Logical Partition (SLPR) number.
NOTE: SLPR does not exist in the XP7 and P9500 disk arrays. So, the Slpr
field displays N/A for the XP7 and P9500 disk arrays in the output screen of
the Port menu.
Slpr
Count of DKAs associated with LDEVs mapped to the portDKA#
Count of RAID groups mapped to the portDg#
Menus 31