HP XP7 Performance Advisor v6.1 Software Troubleshooting and FAQs Guide

Table 10 Configuring the e-mail (SMTP) courier on the web server for reports (continued)
The following entry specifies who the e-mail is said to be
coming from:
SMTP_Rpt_Mail_From=[e-mail]
Table 11 Formatting and content of SNMP trap messages sent by HP XP7 Performance Advisor
...%HPSS_HOME%\pa\properties\serverparameters.propertiesFile
The message is of type SNMPv1. It has the following
formant and content:
PDU version -- 0 (indicates type SNMPv1)
Discussion
Community -- public
Message type -- 0xa4 (indicates a trap message)
Enterprise -- The vendor identification (OID).
Agent-Address -- The IP address of the management station
where the trap is generated.
Generic Trap Type -- 6 (enterprise-specific)
Timestamp -- 0 (not used)
Variable bindings -- This field consists of a sequence of
(oid/name=value) pairs. The content is the same as the
message that is sent by e-mail.
Following is the list of OIDs:
.1.3.6.1.4.1.11.2.27.5.1.1 (Server Name)
.1.3.6.1.4.1.11.2.27.5.1.2 (Sequence Number)
.1.3.6.1.4.1.11.2.27.5.1.3 (Source Application)
.1.3.6.1.4.1.11.2.27.5.1.4 (Alarm Type)
.1.3.6.1.4.1.11.2.27.5.1.5 (Minor Type)
.1.3.6.1.4.1.11.2.27.5.1.6 (Metric Value)
.1.3.6.1.4.1.11.2.27.5.1.7 (DKC Serial Number)
.1.3.6.1.4.1.11.2.27.5.1.8 (DKC Type)
.1.3.6.1.4.1.11.2.27.5.1.9 (Level of the Detection)
.1.3.6.1.4.1.11.2.27.5.1.10 (Actual Value)
.1.3.6.1.4.1.11.2.27.5.1.11 (Threshold)
.1.3.6.1.4.1.11.2.27.5.1.12 (Time Stamp)
Table 12 Configuring the host agent: ManagementStation.Hostname
On Windows platforms:
C:\Program Files\Hewlett-Packard\xppa\
hostagent\config\paxp_service.properties
File
If installed in a different location, the path is as follows:
<Installation drive>:\xppa\hostagent\config\
paxp_service.properties.
On UNIX platforms:
/opt/xppa/hostagent/config/
paxp_service.properties
Common for both Windows and UNIX platforms:
Configuration FAQs 79