HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

Display column headers with delimited data.–L

Displays data in a human readable format.–hr

Prints this usage statement.–?

Specify the option to display information.-resp

read – for ldev read response time

write – for ldev write response time

all – for ldev read and write response time

Can be used only with the –dver option.

The -dver must be 020000.

NOTE: The -resp,-st and –et options are supported with the –jid option only.

Examples

jnl -hr -dkc 10001

jnl -hr -dkc 10001 -jid 0

jnl -hr -dkc 10001 -jid 0 -st 4.5.2007 03:00:00 -et 4.5.2007 03:10:00

-resp

EXPORTDB

Syntax

exportdb [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] [-st

<mm.dd.yyyy hh:mm:ss>] [-et <mm.dd.yyyy hh:mm:ss>] [-file <filename>]

-dkc <serial #> -dver <XXXXXX> [-?]

Supported disk array types

XP, P9000 and XP7 disk arrays

Description

Use the ExportDB command to export data, for charting or graphing, and including the Ext-LUN

information to a data visualization program, such as Microsoft Excel. The output of the ExportDB

command for the dkc performance data contains the maximum configuration of an XP12000 array,

even though the XP10000 array has a maximum of 4 CHIPs and 2 ACPs. This is because there

are 16 CHIPs and 8 ACPs columns. However, if the column is not applicable for XP10000, it

displays the text "Invalid" as a column heading. For mix Printed Circuit Boards (PCBs), the column

displays the label "Invalid Mp" as a column heading for MPs 4 to 7.

EXPORTDB 43