HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.–auth
<user:passwd>
Can be used in place of –auth.
NOTE: The password file must be created using the encrypt command only.
–pf <password file>
Specify the delimiter for delimited display.–d
Displays data in a readable format.–hr
Prints the usage statement.–?
Specify the start time in the format mm.dd.yyyy hh:mm:ss.–st <mm.dd.yyyy
hh:mm:ss>
Specify the end time in the format mm.dd.yyyy hh:mm:ss.—et <mm.dd.yyyy
hh:mm:ss>
Specify the THP pool ID for which you want output displayed.—pid<thp pool id>
NOTE: The -st and –et options are supported with the –pid option only.
Examples
snapshot -dkc <array sn no> -hr
snapshot -dkc <array sn no> -L
snapshot -dkc <array sn no> -pid 1
snapshot -dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006
16:15:00
JNL
Syntax
jnl -dkc <serial #> [-jid <journal pool id>] [-auth <user:passwd>] [-ms
<URL>] [-L] [-resp] [-d <char>] [-hr] [-?] [-pf <password file>] [-st
<MM.DD.YYYY hh:mm:ss>] [-et <MM.DD.YYYY hh:mm:ss>]
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
Enables you to obtain Continuous Access Journal related information. This command provides the
following Continuous Access Journal information:
JID — Displays the journal group ID
nl
MU — Displays the mirror descriptions on journal group
nl
CTG —Displays the CT group ID for the journal group
nl
JNLS —Displays the following status in the journal group
Primary Journal:
Constant valueStatus valueString
0Journal pool is not used in a journal group.JSTAT_SMPL
1This means P(S)vol Journal is Normal Normal.JSTAT_PJNN
JNL 41