HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

aggregate -a -items POOL_IOPS:53036:ALL -d 12.02.2013
aggregate -a -items POOL_IOPS:53036:ALL -w 12.02.2013
aggregate -a -items POOL_IOPS:53036:ALL -m 2013.12
aggregate -a -items POOL_IOPS:53036:ALL -h -st 01.15.2014 14:00:00 -et
01.15.2014 16:00:00
aggregate -a -items POOL_IOPS:53056:ALL -d -st 01.12.2014 00:00:00 -et
01.14.2014 16:00:00
aggregate -a -items POOL_IOPS:53036:THP1 -h 12.02.2013 15
aggregate -a -items POOL_IOPS:53036:THP100 -w 12.02.2013
aggregate -a -items POOL_IOPS:53036:THP127 -m 2013.12
aggregate -a -items POOL_IOPS:53036:THP1 -h -st 01.15.2014 14:00:00 -et
01.15.2014 16:00:00
aggregate -a -items POOL_IOPS:53056:THP1 -d -st 01.12.2014 00:00:00 -et
01.14.2014 16:00:00
PROPUTILITY
Syntax
proputility [-i] [-ms <management station>] [-rauth <report
username:password>]
nl
[-cauth <config username:password>]
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
Enables you to configure the properties file, which in turn enables you to integrate other software
and shell scripts.
Switches
Interactive mode. When prompted, provide the URL of the management station.–i
Specify the report user name and password pair. The default value for this entry is
paxp:xparray.
–rauth <report
username:password>
Specify the management station ID or IP address. The default value for this entry is
localhost.
–ms <management
station>
Specify the configuration user name and password pair.
The default value for this entry is confmonxp:redstar.
–cauth <config
username:password>
In the interactive mode, pressing “Enter” for each entry retains the current or default values.
Example
proputility -i
THP
Syntax
thp -dkc <serial #> [-pid <thp/smart pool id>] [-auth <user:passwd>]
[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
PROPUTILITY 39