HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

Optional. Indicates the smart pool monitoring cycle start
time and corresponds to the SVP date and time stamp. If
-st <Date>
start time is not provided, the latest available data is
retrieved and displayed.
Optional. Indicates the smart pool monitoring cycle end
time and corresponds to the SVP date and time stamp. The
-et <Date>
end time must be provided with the start time. If end time
is not provided, but the start time is provided, the
monitoring data of the smart pool is displayed from the
start time till the monitoring data available for the pool.
NOTE: To get the smart pool monitoring cycle time in correct time zone, navigate to User settings
—>TimeZone Settings —> Local Machine Time and click Save.
Examples
aggregate -a -items TIER_IOPS:53036:ALL
aggregate -a -items TIER_IOPS:53036:ALL -st 12.03.2013 15:00:00
ggregate -a -items TIER_IOPS:53036:ALL -st 12.03.2013 14:00:00 -et
12.03.2013 16:00:00
aggregate -a -items TIER_IOPS:53036:25 -st 12.03.2013 14:00:00 -et
12.03.2013 16:00:00
aggregate -a -items TIER_IOPS:53036:25
aggregate -a -items TIER_IOPS:53036:25 -st 12.03.2013 15:00:00
POOL_IOPS
Syntax
aggregate -a -items POOL_IOPS:<DKC>:{<Pool> | ALL} {-d | -w | -m |- h
| -h -st -et | -d -st -et} <DATE>
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
Provides the I/O per second data for the ThP and smart pools.
Switches
ThP or smart pool for which you want to view the I/O per second. You must enter a
pool id with a ThP prefix, for example, THP1.
POOL
Option to view the I/O per second on all ThP and smart pools.ALL
Day on which the aggregated data for the THP and smart pools is requested.-d
Week in which the aggregated data for the THP and smart pools is requested.-w
Month in which the aggregated data for the THP and smart pools is requested.-m
Hour at which the aggregated data for the THP and smart pools is requested.-h
Start time to view the daily or hourly aggregated data for the specified interval.-st
End time to view the daily or hourly aggregated data for the specified interval.-et
NOTE: The -st and –et options are supported with the -d and -h options only.
Examples
aggregate -a -items POOL_IOPS:53036:ALL -h 12.02.2013 15
38 CLUI commands