HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

RAIDGRP_MB_SREADS - RAID Group sequential read MB/sec
nl
RAIDGRP_MB_SWRITES - RAID Group sequential write MB/sec
nl
RAIDGRP_BE_SREADS - RAID Group backend sequential reads (tracks)
nl
RAIDGRP_BE_NON_SREADS - RAID Group backend non-sequential reads (tracks)
nl
RAIDGRP_UTIL_OVRALL – Overall RAID Group utilization (percent)
nl
RAIDGRP_BE_WRITES - Raid Group backend writes (tracks)
nl
SM_CHIP_FBUS_HI_UTIL - Front end bus utilization
nl
SM_ACP_FBUS_LO_UTIL - Front end bus utilization
nl
CM_CHIP_MBUS_HI_UTIL - Back end bus utilization
nl
CM_ACP_MBUS_LO_UTIL - Back end bus utilization
nl
XP7 Thin Provisioning metrics:
nl
THP_IO_TOTAL Total IO/sec of all LDEVs belonging to a particular XP7 Thin Provisioning (THP) Pool
nl
THP_IO_RTOTAL - Total random IO/sec of all LDEVs belonging to a particular
nl
THP Pool THP_IO_RREADS - Random read IO/sec of all LDEVs belonging to a particular
nl
THP Pool THP_IO_RREAD_HITS - Random read IO/sec in cache of all LDEVs belonging to a particular THP Pool
nl
THP_IO_RWRITES - Random write IO/sec of all LDEVs belonging to a particular
nl
THP Pool THP_IO_STOTAL - Sequential total IO/sec of all LDEVs belonging to a particular THP Pool
nl
THP_IO_SREADS - Sequential read IO/sec of all LDEVs belonging to a particular THP Pool
nl
THP_IO_SREAD_HITS - Sequential read IO/sec in cache of all LDEVs belonging to a particular THP Pool
nl
THP_IO_SWRITES - Sequential write IO/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_TOTAL - Total MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_RTOTAL - Total random MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_RREADS - Random read MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_RWRITES - Random write MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_STOTAL - Sequential total MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_SREADS - Sequential read MB/sec of all LDEVs belonging to a particular THP Pool
nl
THP_MB_SWRITES - Sequential write MB/sec of all LDEVs belonging to a particular THP Pool
Snapshot metrics:
nl
SNAP_IO_TOTAL Total IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_RTOTAL - Total random IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP _IO_RREADS - Random read IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_RREAD_HITS - Random read IO/sec in cache of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_RWRITES - Random write IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_STOTAL - Sequential total IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_SREADS - Sequential read IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_SREAD_HITS - Sequential read IO/sec in cache of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_IO_SWRITES - Sequential write IO/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_TOTAL - Total MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_RTOTAL - Total random MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_RREADS - Random read MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_RWRITES - Random write MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_STOTAL - Sequential total MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_SREADS - Sequential read MB/sec of all LDEVs belonging to a particular Snapshot Pool
nl
SNAP_MB_SWRITES - Sequential write MB/sec of all LDEVs belonging to a particular Snapshot Pool
Examples
aggregate -items ldev_io_total:10033:CLPR2 -st
aggregate -items LDEV_MB_TOTAL:10055:06:00 -hr
aggregate -items LDEV_BACKEND_SEQ_READ:10055:06:00 -hr
aggregate -items port_io_max:50129:CL1E -st 09.16.2003 05:00:00 -et
aggregate -items port_io_max:50129:CL1E-CL1G -st 09.16.2003 05:00:00
-et
aggregate -items PORT_MB_MAX:10055:CL1E -hr
aggregate -items ACP_PAIR_IO_TOTAL:10009:AUMU -hr
36 CLUI commands