HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —day
mm.dd.yyyy
Daily
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —h
mm.dd.yyyy hour
NOTE: The hour that you specify must be in a 24 hour format.
Hourly
where:
Indicates the month in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the monthly overall RAID Group utilization values. Specify the month in
mm format and year in yyyy format.
-m
Indicates the week in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the weekly overall RAID Group utilization values. Specify the week in
mm.dd.yyyy format. The day that you specify must correspond to a Sunday.
-w
Indicates the day on which the RAID Group utilization is requested. This option must be used
with-a for retrieving the daily overall RAID Group utilization values.
-day
Indicates the hour for which the RAID Group utilization is requested. This option must be used
with-a for retrieving the hourly overall RAID Group utilization values. Specify the date in
mm.dd.yyyy format, and the hour in 24 hours format.
-h
The Overall RAID Group Utilization Average is the average value (percent) of the set of utilization
samples returned for the requested time period (sum of sample values/number of samples).
The Overall RAID Group Utilization Maximum is the maximum value (percent) in the set of utilization
samples returned for the requested time period.
NOTE: Install Auto LUN XP7 and enable the monitor on the XP1024/XP128 arrays to make the
RAID Group Utilization metrics available on the arrays.
The following metrics are available:
LDEV_IO_TOTAL Total LDEV IOs/sec
nl
LDEV_IO_RAND_TOTAL - Total Random LDEV IOs/sec
nl
LDEV_IO_RAND_READ LDEV Random IO reads/sec
nl
LDEV_IO_RAND_READCACHE LDEV Random IO Reads/sec from cache
nl
LDEV_IO_RAND_WRITE LDEV Random IO writes/sec
nl
LDEV_IO_SEQ_TOTAL - LDEV Total Sequential Ldev IOs/sec
nl
LDEV_IO_SEQ_READ LDEV Sequential IO reads/sec
nl
LDEV_IO_SEQ_READCACHE LDEV Sequential IO reads/sec from cache
nl
LDEV_IO_SEQ_WRITE - LDEV Sequential IO writes/sec
nl
nl
LDEV_MB_TOTAL - LDEV total MB/sec
nl
LDEV_MB_RAND_TOTAL - LDEV total random MB/sec
nl
LDEV_MB_RAND_READ - LDEV random read MB/sec
nl
LDEV_MB_RAND_WRITE - LDEV random write MB/sec
nl
LDEV_MB_SEQ_TOTAL - LDEV sequential total MB/sec
nl
LDEV_MB_SEQ_READ - LDEV sequential read MB/sec
nl
LDEV_MB_SEQ_WRIT - LDEV sequential write MB/sec
nl
LDEV_BACKEND_SEQ_READ - LDEV backend sequential reads (tracks)
nl
LDEV_BACKEND_NONSEQ_READ - LDEV backend non-sequential reads (tracks)
nl
LDEV_BACKEND_WRITE - LDEV backend writes (tracks)
nl
PORT_IO_MAX - Port maximum IO/sec
nl
PORT_IO_MIN - Port minimum IO/sec
nl
PORT_IO_AVE - Port average IO/sec
nl
PORT_MB_MAX - Port maximum MB/sec
nl
PORT_MB_MIN - Port minimum MB/sec
nl
PORT_MB_AVE - Port average MB/sec
34 CLUI commands