HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

EVNTLOG
Syntax
evntlog [-auth <user:passwd>] [-ms <URL>] [-L] [-d<char>] [-hr] [-?]
[-type <type ID>] [-sev <severity>] [-st <mm.dd.yyyy hh:mm:ss>] [-et
<mm.dd.yyyy hh:mm:ss>]
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
Enables you to view a log or record for all the events generated by HP XP7 Performance Advisor.
This command also enables you to filter the event records based on the severity and type of events.
Switches
Specify the type of the event.–type <type ID>
Specify the severity of the event, range 1 - 10.–sev <severity>
Specify the start time and date of the event to display.–st <mm.dd.yyyy hh:mm:ss>
Specify the end time and date of the event to display.–et<mm.dd.yyyyhh:mm:ss>
Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.–auth <user:passwd>
Can be used in place of -auth.
NOTE: The password file must be created using the encrypt command only.
–pf
Specify the delimiter for delimited display.–d <char>
Displays data in a readable format.–hr
Prints the usage statement.–?
Displays column headers with the delimiter—L
Examples
evntlog -hr
evntlog -L
USERGRP
Syntax
usergrp [-auth <user:passwd>] [-ms <URL>] [-L] [-d<char>] [-hr] [-?]
–items <item list> | -list | -details | -rem [-name <group name>] [-gid
<group id>]
Supported disk array types
XP, P9000 and XP7 disk arrays
Description
Enables you to create, list, and remove user-defined groups to which you can add LDEVs whose
performance you want to monitor.
Switches
Required. Specify the csv list of items to be added to the user group.
Each item is in the form dkc+host::ldevlist, where: dkc+host is a DKC and host
combination.
–items <item list>
30 CLUI commands