HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

ManualsBrandsHP ManualsSoftwareHP StorageWorks Performance Advisor XP Media Kit

Specify the delimiter for delimited output. Used with -list and -details.–d<delim>

Displays data in a readable format. Used with -list and -details.–hr

Prints the usage statement.–?

The XP7 Thin Provisioning (THP) Pool Occupancy, Snapshot Pool Occupancy, and Continuous

Access Journal metric category for an XP24000 array can be determined using the following

commands:

configalarm -dkc <array sn no> -mval <THP poolid> -metric

THP_POOL_OCCUPANCY

configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric SNAPSHOT_

POOL_OCCUPANCY

configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric

JOURNAL_FILE_USAGE_UTIL

Examples

configalarm -list -hr

configalarm -list –L

configalarm -list

configalarm -dkc 10227 -mval 1 -metric THP_POOL_OCCUPANCY

configalarm -dkc 10227 -mval 0 -metric SNAPSHOT_POOL_OCCUPANCY

configalarm -dkc 10001 -mval 0 -metric JOURNAL_FILE_USAGE_UTIL -th 10

HOSTCFG

Syntax

hostcfg –op <op_string> -ha <HostAgent> [-auth <user:passwd>] [-ms

<URL>] [-L] [d<char>] [-hr] [-?]

Supported disk array types

XP, P9000 and XP7 disk arrays

Description

Displays the configuration data of the host that is connected to the management station. It also

displays array related information. You can also use this command to remove unwanted hosts.

This command does not display HA version and the RMLIB details.

Switches

Required. Specify the task to be performed. Not necessary if -list is used.

–op <op_string>

xpinfo_req: indicates that the XPINFO data must be sent to the management station.

ha_rem: requests the management station to remove this host agent from its database.

Required. Specify the host agent system. This can either be a host name or an IP address.

Not necessary if -list is used.

–ha <hostagent>

Lists the host configuration data that is stored on the management station.–list

The output from the -list switch must be labeled, but delimited.–L

Specify the character for delimited output.–d <char>

Displays data in a readable form.–hr

Specify a user name and password pair in the format user name:password.–auth <user:passwd>

Specify the address of a management station in the format <http://

path.to.managementstation:<port>> or <https://

path.to.managementstation>.

–ms <URL>

Prints the usage statement.–?

HOSTCFG 27