HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

ManualsBrandsHP ManualsSoftwareHP StorageWorks Performance Advisor XP Media Kit

IMPORTANT:

• The LDEV command reports write cache hits for random & sequential workloads using

the -dver 010600 option

For P9000 and XP7 disk array, the current and the default MP blades for an LDEV are also

displayed in the command output.

Switches

Required. Specify the array serial number.–dkc <serial #>

Specify the delimiter for delimited output.

There is no space between -d and the delimiter.

–d<delim>

Specify the labeled and delimited output data.–L

Displays data in a readable format.–hr

Specify the address of a management station in the format <http://

path.to.managementstation:<port>> or <https://

path.to.managementstation>.

–ms <URL>

Specify a user name and password pair in the format user name:password.–auth <user:passwd>

Specify the version number. Indicates how the data must be displayed. Currently supported

values are 010500 and 010600. The default value is 010500.

–dver <xxxxxx>

Required. Specify the logical device number in the form <cu>:<ldev>, where:

<cu> is the control unit number (0...ff).

–ldev <logical device #>

<ldev> is the logical device number (0...ff).

NOTE: To get the logical device number, run the LUND command. For more information,

see LUND .

Specify the start time in the format mm.dd.yyyy hh:mm:ss.–st <start time>

Specify the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>

Prints the usage statement.–?

Examples

ldev -dkc 30143 -ldev 1:6C -st 01.03.2001 12:49:00 -et 01.03.2001

14:20:00

ldev -dkc 10055 -ldev 0:7E

ldev -dkc 10055 -L -ldev 0:7E

ldev -dkc 10055 -ldev 0:7E -dver 010600

ldev -dkc 10055 -ldev 0:7E -dver 010600 –L

ldev -dkc 10055 -ldev 0:7E -st 06.19.2006 14:00:00 -et 06.19.2006

14:30:00

ALARMHIST

Syntax

alarmhist [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] [-dkc

<serial #>]

[-metric <Category>] [-mval <Item Value>] [-st <mm.dd.yyyy hh:mm:ss>]

[-et <mm.dd.yyyy hh:mm:ss>] [-tclass <Time Class>] [-pf <password file>]

Supported disk array types

XP, P9000 and XP7 disk arrays

Description

ALARMHIST 23