HP XP7 Performance Advisor Software 6.1 Command-line User Interface Reference Guide

DKCH
Syntax
dkch [-d<delim>] [-L] [-hr] [-ms<URL>] [-auth <user:passwd>] -dkc <serial
#> [-st <start time> -et <end time>] [-?]
Supported disk array types
XP, P9000 and XP7 disk arrays.
NOTE: The output for this command may be different for XP, P9000 and XP7 disk arrays. For
more information, see “DKCH” (page 57).
Description
Displays the CHIP and ACP utilization history of XP arrays for a given time range. Also, displays
MP Blade and Disk Adapter (DKA) Utilization history of P9000 and XP7 arrays for a given time
range.
Switches
Required. Specifies the array serial number.–dkc <serial#>
Specifies the delimiter for delimited output. There is no space between -d and the delimiter
character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.–-auth <user:passwd>
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.—st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
Prints the usage statement.–?
NOTE: If no start and end time is specified, only the most recent 10 records are retrieved from
the management station.
Examples
dkch -dkc 10055 -hr
dkch -L -dkc 30143
dkch -dkc 10055 —L
LUNH
Syntax
lunh [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -ha <host
ID>[-mr <maxRecords>] [-rg <raidGroup>] [-chp <chpPort>] [-acp <acpPair>]
[-dkc <serial #>] [-dver <xxxxxx>] [-?] [-luse] [-ugrp]
Supported disk array types
XP, P9000 and XP7 disk arrays.
NOTE: The output for this command may be different for XP, P9000 and XP7 disk arrays. For
more information, see the sample “LUNH” (page 62) report.
Description
DKCH 19