HP XP7 PA Software User Guide

Volume Information
The following table provides a summary of all the components for the selected XP/XP7 disk
array.
The total number of LDEVs created from RAID groups.Physical LDEVs
The total number of Ports available from the installed CHAs.Ports
The number of LDEVs that have one or more associated
paths (host connectivity). This is an aggregate of the
LUNs
following: Physical LDEVs with paths plus the virtual volumes
with paths plus the total number of LDEVs in LUSE that has
an associated path.
The total number of LDEVs configured in an LUSE.LUSE
Total number of Raid groups defined on the XP/XP7 disk
array.
RAID Groups
The total number of external volumes associated with an
XP or an XP7 disk array.
External VOLs
The total number of physical LDEVs configured as the
continuous access journal volumes.
Continuous Access JNL Vols
The total number of ThP virtual volumes defined on an XP
or an XP7 disk array.
THP VVOLs
The total number of distinct snapshot VVols that are
associated with one or more host port(s).
SnapShot VVOLs
Raw Capacity The total installed capacity of an XP or an XP7 disk array.
It does not refer to the array usable capacity. For each
RAID group, the raw capacity is calculated as follows:
(number of disks that belong to a particular RAID type *
size of the disks).
The total number of physical LDEVs configured as pool
volumes.
NOTE: Displayed only for the XP7 disk arrays.
Smart VVols
Related Topics
• “Viewing performance summary” (page 177)
• “Advisory on CLPR utilization” (page 185)
• “Viewing CHIP/CHA data” (page 185)
• “Viewing ACP/DKA data” (page 189)
• “Viewing MP blade utilization for P9500/XP7 disk arrays” (page 193)
• “Viewing Smart and ThP pools data for P9500/XP7 disk arrays” (page 197)
• “Utilization Summary” (page 183)
• “10 busiest LDEVs/Ports” (page 208)
• “10 busiest LDEVs/RAID groups” (page 209)
• “RAID Group summary” (page 210)
• “Port summary” (page 212)
• “Viewing LDEV data” (page 214)
182 Viewing XP and XP7 disk array components