HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

5. In the respective resource type lists, select the check boxes for resources to collect their performance
data. The following resource type lists are displayed:
Displays DKC that provides information on CHIPs,
ACPs, Cache, SLPR, CLPR, and SM.
DKC
Displays the frontend ports.Port
Displays the XP array volumes, including BC, XP
Continuous Access (Synch/Async) volumes.
RAID Groups
Displays all ThP volumes.THP Groups
Displays all Snapshot volumes.Snap Groups
Displays all XP Continuous Access Journal volumes.CA Journal Groups
Displays all external RAID groups connected to the
selected XP array.
External RAID Groups
NOTE:
• Selecting a ThP, Snapshot, or XP Continuous Access Journal volumes also provides the
respective volume pool information.
• The THP Groups, CA Journal Groups, and Snap Groups resource type lists are displayed
only if the corresponding resources are configured on the selected XP array. The
External RAID Groups resource type list is displayed only if external volumes are attached
to the selected XP array.
• Select the Select All check box in a particular resource type list box, if you want all the
corresponding resources to be selected. The Select All check box is provided for each
resource type list.
Figure 5 Performance Data Collection
.
Collecting configuration and performance data54