HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

ExamplesDescriptionCollection
Schedule
If you create an hourly
schedule at 12:30 PM and
set the schedule frequency as
1 hour, XP Performance
Advisor executes the
schedule only at 1:00 PM
and collects data for the next
one hour. A new instance of
the schedule executes at
2:00 PM again. This process
repeats for every 1 hour.
If collection schedule is selected as Hourly, the Hourly Schedule
list appears. Select the schedule frequency as 1 hour, 6 hours,
or 12 hours.
The Start Time list is not enabled for the Hourly collection
schedule.
Hourly
If collection schedule is selected as Daily, provide the schedule
start time. Every time the schedule is executed, XP Performance
Advisor collects the configuration data for the last 24 hours only.
Daily
If collection schedule is selected as Weekly, the Day of the Week
list appears. Select the day, and provide the schedule start time.
Every time the schedule is executed, XP Performance Advisor
collects the configuration data for the last one week only.
Weekly
If you select Sunday as the
day of the week, 2 as the
week of the month, and start
time as 8:00 PM, XP
Performance Advisor
executes the schedule on the
2nd Sunday of every month
at 8:00 PM.
If collection schedule is selected as Monthly, the Monthly
Schedule appears with options for scheduling the collection on
a particular date (Based on Date) or day (Based on Day) of a
month. Every time the schedule is executed, XP Performance
Advisor collects the configuration data for the last one month
only.
• If you want to schedule the collection on a particular date:
• Select the Monthly Schedule as Based on Date, if it is not
selected by default.
• Provide the schedule start time by selecting from the Start
Time list.
• From the Date of the Month list, select the date when you
want the schedule to execute every month. By default,
1st is selected as the default date of the month.
• If you want to schedule the collection on a particular day:
• Select the Monthly Schedule as Based on Date, if it is not
selected by default.
• From the Day of the Week list, select the day when you
want the schedule to execute every month. By default,
Sunday is selected as the day of the week.
• Further, select the week to which the day belongs from
the Week of the Month list. This is a mandatory selection.
By default, the 1st week is selected as the week of the
month.
• Provide the schedule start time by selecting from the Start
Time list.
Monthly
Deleting configuration data collection schedules
To delete a configuration data collection schedule:
HP StorageWorks XP Performance Advisor Software User Guide 49