HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

DescriptionScreen elements
Displays the DKC number and user-friendly name of the XP array.Array (Array Name)
Displays the system name of the host.Host ID
Displays the ports that are configured to communicate data between the command
device on an XP array and the associated host.
Port
Displays the LDEV ID of the LDEV that is configured as a command device.Cmddev
Displays the device file for the command device.DeviceFile
Displays —, if configuration collection is not yet initiated for an XP array. After a
configuration data collection is initiated, the Last Collection shows the date and
time when XP Performance Advisor receives the complete configuration data from
the XP array.
Last Collection
Displays —, if configuration collection is not yet scheduled, or if a one-time
configuration data collection is performed on an XP array. The schedule type and
duration (date and time stamp) are displayed under Frequency, only if a
configuration data collection is scheduled.
Frequency
Displays Not yet done, as configuration data collection (one-time or scheduled)
has not yet been initiated on an XP array.
Collection Status
The Configuration Collection table is automatically refreshed every 2 minutes. You can also click
Refresh to perform a manual refresh of the Configuration Collection table.
CAUTION:
Ensure that the date and time on the management station and hosts are synchronized with the local
time zone to receive accurate configuration data. This condition is also applicable for the client systems
that use the IE browser to access XP Performance Advisor on a management station, and systems that
have CLUI software installed.
HP StorageWorks XP Performance Advisor Software User Guide 43