HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

2. On the HP StorageWorks XP Application Performance Extender Software screen, click Launch
HP StorageWorks XP Application Performance Extender Software.
The text displayed on the HP StorageWorks XP Application Performance Extender Software screen
is taken from the AppIntegrations.properties file. So, ensure that the text is not changed
in the AppIntegrations.properties file.
Figure 23 HP StorageWorks XP Application Performance Extender Software screen
.
The XP Application Performance Extender home page is displayed in a separate IE browser window.
IMPORTANT:
• Only one session of XP Application Performance Extender can be active at a time.
• If you close the current session of XP Application Performance Extender, wait for at least 15 seconds
before you launch another session.
• If you are not able to launch XP Application Performance Extender from XP Performance Advisor,
verify the following:
• If the XP Application Performance Extender management station's IP address or DNS name
specified in the AppIntegrations.properties file is correct and if the management
station is active.
• If the port number specified for XP Application Performance Extender in the AppIntegra-
tions.properties file is supported by XP Application Performance Extender (default port
number:8080).
If XP Application Performance Extender cannot be launched even after you have verified the
above-mentioned, contact your HP representative for support.
Launching XP Application Performance Extender from XP Performance Advisor296