HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

7. Click New under Host and provide the host name.
Following are the different possible combinations:
• Associate a new application with a new host.
• Associate a new application with an existing host.
• Associate an existing application with an existing host. To associate an existing application
with a new host or existing host, click Existing under Application and select the application
name from the list.
There may be cases where the LDEVs associated with an application are made available
through two hosts belonging to different WWNs. In such cases, you may want to associate
the application with both the hosts. If you want to associate an existing host with a new or
existing application, click Existing and select the host name from the list. There may be cases
where the same set of LDEVs are made available through one host to two different applications.
In such cases, you may want to associate the host with both the applications.
• Associate an existing application with a new host.
8. Click Add/Remove.
You are shown an informational message that the application settings are saved.
9. Click Close to come back to the Troubleshooting screen.
HP StorageWorks XP Performance Advisor Software User Guide 281