HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

Filtering LDEV records
Records in the LDEV table can be filtered in the following ways:
• Filter records based on user specified criteria
• Filter records based on existing selection
• Filter records for values greater or lesser than the specified value
Filter records based on user specified criteria
This type of filter is applicable when you can enter the filter criteria. It is used when you want to view
data for specific LDEV IDs. If the data for the specified LDEV IDs are not available in the current list
of records, they are collected from the XP array and displayed in the LDEV table. Following is an
example on filtering records in the LDEV ID list:
1. Click the LDEV ID list.
2. In the LDEV ID filter that appears, provide the LDEV ID. You can also enter multiple LDEV IDs in
the following format: CU:LDEV1,CU:LDEV2,CU:LDEV3
3. Click OK.
The data in the LDEV table is filtered to display only the records for the specified LDEV IDs.
Filter records based on existing selection
This type of filter is applicable when you can select the filter criteria. The data in the LDEV table is
filtered based on your selection and displayed. Following is an example on filtering records in the
RAID Group list:
1. Click the RAID Group list.
2. In the RAID Group filter that appears, select the check box for the RAID groups to view their
respective data.
3. Click OK.
The data in the LDEV table is filtered to display the data only for the selected RAID groups.
Filter records for values greater or lesser than the specified value
Viewing XP arrays resources202