HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

It also provides the current replication pair status between the PVOLs and SVOLs.
IMPORTANT:
• If the state for an LDEV shows up as SMPL (Simplex), it means that the LDEV is neither configured
as a PVOL or SVOL.
• The replication pair status is displayed only when you do a fresh configuration collection for an
XP array. However, if the configuration data collection is scheduled, the replication pair status is
automatically updated to show the current status.
To view the replication volumes and the status of the replication:
1. Click the Column Settings check box.
2. To view the Cont. Access volumes, select the Cont. Access check box in the LDEV Column Settings
list.
To view the BC volumes, select the check box for the BC Vol 0, BC Vol1, or BC Vol2, or you can
select all the three volumes in the LDEV Column Settings list.
3. Click Update Columns for the new columns to be added to the LDEV table.
Clear the Column Settings check box to close the LDEV Column Settings list.
4. In the LDEV table, click a Cont. Access or BC volume to view the associated PVol or SVol, and
their current replication pair status.
Following are the different replication pair statuses:
DescriptionReplication pair statuses
Volume is not configured for replication activity.SMPLex
Volume is in the Copy mode, where data from the
P-Vol is being copied to the S-Vol.
COPY
Volumes are configured for replication activity.PAIRED
The replication pair volumes are suspended mode.Pair Suspend
The replication pair volumes are suspended, as an
error is noticed with the pair.
Pair Suspend Error
The replication is in a reverse copy mode, from S-Vol
to P-Vol.
Reverse Copy
The Cont. Access asynchronous side file usage is
over 30%.
Pair SideFile 30% over
HP StorageWorks XP Performance Advisor Software User Guide 201