HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

5. From the Array list, select the XP array for which you want to generate or schedule the Export
DB report.
6. Select the check box for Human Readable Format (you can view the data for the LDEV in the
cu:ldev format).
7. Select the check box for Version Number Select Version Number to enable the corresponding
list. The list displays the following supported versions based on the XP array type that you select:
020000
016000
010600
010500
8. Select the check box for Response Time to view the following read-write response time for all the
LDEVs. It is enabled only when the Version check box is selected.
Read for ldev read response time
Write for ldev write response time
All for ldev read and write response time
9. Select the check box for the RAID Group Utilization to view the RAID Group utilization. This option
can be used only when the Response Time check box is selected. To view the RAID group
utilization, select the version as 016000 or 020000.
10. Select the check box for Display LDEV's of the Journal to view all the LDEVs that belong to a
journal. This command retrieves the data collected for the duration, 6 p.m., 1st June 2007 and
10 a.m., 2nd June 2007, and places the data in a text file named test_jnl.xls. The data
collected is about the LDEVs that belong to all the journals in the selected XP array. The .xls
file is an addition to the four files that are already displayed.
Managing the XP Performance Advisor database156