HP StorageWorks XP Performance Advisor Software v4.6 User and Troubleshooting Guide (T1789-96094, June 2010)

3. Click Copy to Template.

The record details are populated as applicable in the following text boxes, in the Apply Template

section:

4. Select the records for which the copied settings should be applied. (It is not mandatory that you

click the check box for a resource record to select it).

5. Click Apply Template. If required, you can modify the alarm settings copied to the Apply Template

section and then apply the updated settings to other records in the Alarms table.

The configuration settings of the previously selected record are applied to all the other newly

selected records.

If you do not want to retain the copied settings, click Clear Template to clear the selection in the

text boxes, in the Apply Template section.

NOTE:

If you click Apply Template before selecting other resource records, the updated settings

are applied back to the current selected record in the Alarms table.

6. Click Edit to commit the changes.

You can also select a resource record and directly apply specific settings on that record, without using

the Copy Template feature.

1. Select the check box for that resource record. (You can also select multiple resource records).

2. In the Apply Template section, provide the values or settings that you want to update for the se-

lected resource record.

3. Click Apply Template followed by Edit.